Property of LITE-ON Only
FEATURES
* Current transfer ratio
( CTR : MIN. 80% at IF = 5mA, VCE = 5V ) * Isolation voltage between input and output LTV-358T
( Viso = 3,750Vrms )
* High collector-emitter voltage
( VCEO = 120V )
* Employs double transfer mold technology
* Subminiature type
( The volume is smaller than that of conventional DIP type by as far as 30% ) * Mini-flat package :
2.0mm profile : LTV-358T * UL approved ( No. E113898 )
* CUL approved ( No. E113898 , 01SC19287 ) * CSA approved ( No. 1243207 ) * FIMKO approved ( No. FI-16420 ) * NEMKO approved ( No. P01100403 ) * DEMKO approved ( No. 310475-01 )
* SEMKO approved ( No. 0109173 / 01-08 ) * VDE approved ( No. 094722 ) * RoHS compliance
APPLICATIONS
* Hybrid substrates that require high density mounting. * Programmable controllers
Part No. : LTV-358T
BNS-OD-C131/A4
Page : 1 of 9
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
OUTLINE DIMENSIONS LTV-358T : 2.54±0.25Pin No. and Internalconnection diagramDate Code *1434.40±0.2Factory Code *2.Rank *311. Anode2. Cathode23. Emitter4. Collector3.85±0.35.30±0.30.2±0.052.00±0.20.10±0.10.40±0.17.00+0.2-0.7 *1. 2-digit date code. *2. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). *3. Rank shall be or shall not be marked. Part No. : LTV-358T BNS-OD-C131/A4 Page : 2 of 9 LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
TAPING DIMENSIONS Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Symbol W P0 F P2 P1 Dimensions in mm ( inches ) 12 ± 0.3 ( .47 ) 4 ± 0.1 ( .15 ) 5.5 ± 0.1 ( .217 ) 2 ± 0.1 ( .079 ) 8 ± 0.1 ( .315 ) Part No. : LTV-358T BNS-OD-C131/A4 Page : 3 of 9 LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
ABSOLUTE MAXIMUM RATING
PARAMETER
INPUT
OUTPUT
Collector Current
Collector Power Dissipation
IC PC Ptot Viso Topr Tstg Tsol
50 150 170 3,750 -55 ~ +100 -55 ~ +150 260
mA mW mW Vrms °C °C °C
Forward Current Reverse Voltage Power Dissipation Collector - Emitter Voltage Emitter - Collector Voltage
SYMBOL
IF VR P VCEO VECO
RATING 50 6 70 120 6
( Ta = 25°C )
UNIT mA V mW V V
Total Power Dissipation
*1 Isolation Voltage
Operating Temperature Storage Temperature
*2 Soldering Temperature
*1. AC For 1 Minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds
Part No. : LTV-358T
BNS-OD-C131/A4
Page : 4 of 9
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
ELECTRICAL - OPTICAL CHARACTERISTICS PARAMETER Forward Voltage INPUT Reverse Current Terminal Capacitance Collector Dark Current SYMBOL MIN. TYP. MAX. UNIT VF IR Ct ICEO — — — — 120 1.2 — 30 — — 1.4 10 250 100 — V µA pF nA V ( Ta = 25°C ) CONDITIONS IF=20mA VR=4V V=0, f=1KHz VCE=40V, IF=0 OUTPUT Collector-Emitter BVCEO Breakdown Voltage Emitter-Collector Breakdown Voltage Collector Current *1 Current Transfer Ratio Collector Current *1 Current Transfer Ratio BVECO IC CTR IC CTR VCE(sat) IC=0.1mA IF=0 IE=10µA IF=0 IF=5mA VCE=5V TRANSFER CHARACTERISTICS 6 4 80 0.2 20 — — — — — — — — 20 400 — — 0.2 V mA % mA % V IF=1mA VCE=5V Collector-Emitter Saturation Voltage Isolation Resistance IF=20mA IC=1mA DC500V 40 ~ 60% R.H. V=0, f=1MHz VCE=2V, IC=2mA RL=100Ω Riso Cf tr tf 5×1010 1×1011 — — — 0.6 4 3 — 1 18 18 Ω pF µs µs Floating Capacitance Response Time (Rise) Response Time (Fall) *1 CTR=IC×100% IF Part No. : LTV-358T BNS-OD-C131/A4 Page : 5 of 9 LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
RANK TABLE OF CURRENT TRANSFER RATIO CTR
MODEL NO. RANK MARK
A
CTR ( % ) 80 ~ 160 130 ~ 260 200 ~ 400 80 ~ 400
CTR ( % )
>20 >45 >70 >20
LTV-358T
B C
A or B or C or No Rank
IF = 5 mA VCE = 5 V Ta = 25 °C
CONDITIONS
IF = 1 mA VCE = 5 V Ta = 25 °C
Part No. : LTV-358T
BNS-OD-C131/A4
Page : 6 of 9
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
CHARACTERISTICS CURVES Fig.1 Forword Currentvs. Ambient Temperatute60Fig.2 Collector Power Dissiptionvs. Ambient TemperatureCollector Power dissipation Pc (mW)200Forward current IF (mA)50403020100-55150100500255075100o1250-550255075100o125Ambient temperature Ta ( C)Ambient temperature Ta ( C)Fig.3 Collector-emitter SaturationVoltage vs. Forward Current1mA3mA5mACollecotr-emitter saturation voltageVCE(sat) (V)Ic=0.5mA7mA6543210Ta=25 COFig.4 Forward Current vs. ForwardVoltage500Ta=75 C50 CooForward current IF (mA)2001005020105225 C0 C-25 Cooo051015100.51.01.52.02.53.0Forward current IF (mA)Forward voltage VF (V)Fig.5 Current Transfer Ratio vs.Forward Current200180160140120100806040200125102050Fig.6 Collector Current vs.Collector-emitter Voltage50IF=30mA25mA20mA3015mA2010mA105mA00123456789Pc(MAX.)Ta=25 CoCurrent transfer ratio CTR (%)VCE=5VTa=25 CoForward current IF (mA)Collector current Ic (mA)40Collector-emitter voltage VCE (V) Part No. : LTV-358T BNS-OD-C131/A4 Page : 7 of 9 LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
CHARACTERISTICS CURVES Fig.7 Relative Current Transfer Ratiovs. Ambient Temperature150Relative current transfer ratio (%)Fig.8 Collector-emitter Saturation Voltagevs. Ambient TemperatureCollector-emitter saturation voltageVC E (sat) (V)IF=5mAVCE=5V0.100.080.060.040.02 0IF=20mAIC=1mA10050 020406080o10020406080o100Ambient temperature Ta ( C)Ambient temperature Ta ( C)Fig.9 Collector Dark Current vs.Ambient Temperature10000Fig.10 Response Time vs. LoadResistance5002001005020105210.50.20.05tsCollector dark current ICEO (nA)VCE=20VResponse time ( s)1000VCE=2VIC=2mATa=25 Cotrtftd10010120406080o1000.10.20.512510Ambient temperature Ta ( C)Load resistance RL (k)Fig.11 Frequency ResponseTest Circuit for Response TimeVccInputInputOutputOutputtstrtfVoltage gain Av (dB)0VCE=2VIC=2mATa=25 CoRDRL10%90%td10010RL=10k1kTest Circuit for Frequency ResponseVcc200.5125102050100500RDRLOutputFrequency f (kHz) Part No. : LTV-358T BNS-OD-C131/A4 Page : 8 of 9 LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
Temperature Profile of Soldering Reflow (1) One time soldering reflow is recommended within the condition of temperature and time profile shown below. 30 seconds230 C200 C180 C1 minute25 C2 minutes1.5 minutes1 minute (2) When using another soldering method such as infrated ray lamp, the temperature may rise partially in the mold of the device. Keep the temperature on the package of the device within the condition of above (1) RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm Part No. : LTV-358T BNS-OD-C131/A4 Page : 9 of 9
因篇幅问题不能全部显示，请点此查看更多更全内容