思科交换机给POE供电怎么配置
发布网友
发布时间：2022-04-23 10:24
共2个回答
热心网友
时间：2022-05-11 12:43
1、查看思科交换机是否具有POE功能：
通常情况下带P字的表示具有POE功能，一般在2960，3560.3550，4507等都具有支持的板卡或者主机：
XiAn_3560POE#sh version
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C3560-24PS 12.2(25)SED1 C3560-ADVIPSERVICESK
2、思科交换机查看POE供电情况：
XiAn_3560POE#sh power inline ?
FastEthernet FastEthernet IEEE 802.3
GigabitEthernet GigabitEthernet IEEE 802.3z
consumption Show inline power consumption default
| Output modifiers
XiAn_3560POE#sh power inline
Available:370.0(w) Used:84.9(w) Remaining:285.1(w)
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Fa0/1 auto on 12.0 IP Phone 7945 3 15.4
Fa0/2 auto on 10.5 IP Phone 7937 3 15.4
Fa0/3 auto on 6.3 IP Phone 7961 2 15.4
Fa0/4 auto off 0.0 n/a n/a 15.4
Fa0/5 auto on 6.3 IP Phone 7912 n/a 15.4
Fa0/6 auto off 0.0 n/a n/a 15.4
Fa0/7 auto on 6.3 IP Phone 7941 2 15.4
Fa0/8 auto on 6.3 IP Phone 7941 2 15.4
Fa0/9 auto on 6.3 IP Phone 7961 2 15.4
Fa0/10 auto on 6.3 IP Phone 7961 2 15.4
Fa0/11 auto on 6.3 IP Phone 7961 2 15.4
Fa0/12 auto off 0.0 n/a n/a 15.4
Fa0/13 auto on 6.3 IP Phone 7960 n/a 15.4
Fa0/14 auto on 12.0 IP Phone 7965 3 15.4
Fa0/15 auto off 0.0 n/a n/a 15.4
Fa0/16 auto off 0.0 n/a n/a 15.4
Fa0/17 auto off 0.0 n/a n/a 15.4
Fa0/18 auto off 0.0 n/a n/a 15.4
Fa0/19 auto off 0.0 n/a n/a 15.4
Fa0/20 auto off 0.0 n/a n/a 15.4
其中Oper表示用没有用POE功能，power：表示用了实际多少瓦，Max表示最大每个端口可供多少瓦。
3、端口配置POE供电大小如下，同时可调整供电的大小：
XiAn_3560POE(config)#int fa0/20
XiAn_3560POE(config-if)#power inline consump
XiAn_3560POE(config-if)#power inline consumption ?
<4000-15400> milli-watts
XiAn_3560POE(config-if)#power inline consumption
XiAn_3560POE#
热心网友
时间：2022-05-11 14:01
11111
